Teaser - next project

For anything related to customising basses. Tuners, Bridges, Pickups
User avatar
joppo
Moderator
Posts: 746
Joined: Tue Jun 12, 2007 4:11 pm
Location: Dunedin

Re: Teaser - next project

Post by joppo » Sat Nov 24, 2018 10:39 am

Here is a sound demo to give you an idea of what it sounds like. The tone is just rolled off a little on the bass. The signal chain is Bass > 2 Notes Le Bass (clean channel) > Genz Benz Shuttle 3.0 (set flat) > Ashdown 2x10. I used two microphones panned hard left and right so you can listen to one side or the other to see if there is any difference - left channel is an Audio Technica AT2020 and the right channel is a Shure SM57. The only eq is a 2 octave roll off at 40Hz as this bass has a lot of low end! Let me know what you think.
https://soundcloud.com/joppo/custom-bul ... ess-p-bass

User avatar
cjj
Bronze Member
Posts: 85
Joined: Sun Apr 06, 2014 7:31 pm
Location: Chch, NZ

Re: Teaser - next project

Post by cjj » Wed Nov 28, 2018 3:20 pm

Nice sounding bass! Good warm lows with a nice clear "mwah" on the high notes.
Well done!
8) 8) 8)

User avatar
beagle
Site Admin
Posts: 2305
Joined: Fri Nov 03, 2006 1:59 pm
Location: Auckland, New Zealand

Re: Teaser - next project

Post by beagle » Wed Dec 05, 2018 5:51 pm

Yeah that's a really nice sounding bass Nev! Awesome job!
After all that hard work it must be really pleasing to have it sounding that good.
Musicman Sterling, Fender Jazz, GK 800RB, 400RB, Neo412, Neo112, 410T

User avatar
joppo
Moderator
Posts: 746
Joined: Tue Jun 12, 2007 4:11 pm
Location: Dunedin

Re: Teaser - next project

Post by joppo » Wed Dec 05, 2018 10:01 pm

I am really happy with the way it sounds and plays! It is a bit boomy in the recording - I wanted to keep the eq flat, but I think the mics have enhanced the bottom end a little as it isn't boomy through the amp.

Post Reply